|
|
|
|
|
|
|
|
|
|
Description |
Rebuilt |
New |
Core |
| PRICES SUBJECT TO CHANGE WITHOUT NOTICE Updated 11-18-09 | CORE REFLECTS REBUILT ITEM ONLY | ||
| REQUEST PHOTOS OF AN ITEM AT vwmotors@aol.com I will be happy to send to you | |||
| Stock Heads | |||
|
66 - 70, Single Port 1500 cc/1600 cc each QGAP |
$ 139.99 |
call |
$ 15.00 |
|
71 - 74, Dual Port 1600 complete each QGAP |
139.99 |
199.00 |
15.00 |
|
75 - 79, Dual Port F.I. Complete each QGAP |
139.99 |
199.00 |
15.00 |
| New Dual Port Cylinder Heads: Score Approved: This is not a rebuilt unit. Head comes with the standard 35.5 mm intake and 32 mm exhuast valves. Manufactured in Brazil: the 040-101-0375 casting make these heads score legal. These heads use standard 14mm 1/2 reach spark plug. | |||
Dual Port Cylinder Head Bare:
043-101-355c:
98-1355B SCORE LEGAL each
These heads use standard 14mm 1/2 reach spark plug.
|
229.00 |
||
| Dual Port Cylinder Head COMPLETE: 043-101-355CK; 98-1356B SCORE LEGAL each These heads use standard 14mm 1/2 reach spark plug. |
259.00 |
||
| HEAD NUT KIT: 32 Piece set Specify 8mm or 10 mm RC |
8.99 |
||
| COPPER HEAD GASKETS: Copper head gaskets may be used when adjusting deck height in performance applications. Set of 4 | |||
| 90.5mm/92mm .040" (4) Copper 19-9529 | 19.99 | ||
| 90.5mm/92mm .050" (4) Copper 19-9530 | 19.99 | ||
| 90.5mm/92mm .060" (4) Copper 19-9531 | 24.99 | ||
| 94mm .040" (4) Copper 19-9532 | 19.99 | ||
| 94mm .050" (4) Copper 19-9533 | 19.99 | ||
| 94mm .060" (4) Copper 19-9534 | 24.99 | ||
| CYLINDER HEAD SPACERS: 1500-1600 | |||
| Head Spacers, .030", set of 4 21-5008 | 9.99 | ||
| Head Spacers, .040", set of 4 21-7616 | 9.99 | ||
| Head Spacers, .060", set of 4 21-5009 | 9.99 | ||
|
STOCK INTAKE & EXHAUST VALVES 1500cc & 1600cc |
|||
| Intake valve 35.5 311-109-601 98-1960B ea. | 7.99 | ||
| Exhaust valve 32mm 113-109-612A, 98-1962B ea. | 9.99 | ||
| STAINLESS STEEL VALVES: These are high quality one piece forged stainless steel with stellite tip valve stems and swirl polished heads. suitable for both intake and exhaust. | |||
| Stainless steel valve, 32mm each 98-1932B | 12.99 | ||
| Stainless steel valve, 35.5mm each 98-1935B | 14.99 | ||
| Stainless steel valve, 37mm each 98-1937B | 14.99 | ||
| Stainless steel valve, 40mm each 98-1940B | 14.99 | ||
| Stainless steel valve, 42mm each 98-1942B | 14.99 | ||
| Stainless steel valve, 44mm each 98-1944B | 14.99 | ||
| STOCK REPLACEMENT VALVE SPRINGS | |||
| Stock Valve Spring, 1200-1600cc 98-1923B 113-109-623C | 3.99 | ||
 |
|||
| HIGH REV VALVE SPRINGS: SET OF 8 | |||
| High Rev single valve spring set approx 135 lbs sea pressure at 1.555o" installed height. 4040 | 24.99 | ||
| High Rev. Dual Spring set approx. 180 lbs. seat pressure at 1.550" installed height 4060 | 49.99 | ||
| HIGH REV VALVE SPRING KIT: Light weight aluminum alloy Retainers and Hardened Valve locks. What you need to prepare your heads for high lift cam use and high RPM applications | |||
| High Rev. Single Spring Kit 4045 | 49.99 | ||
 |
|||
| High Rev Dual Spring Kit 4060 | 59.99 | ||
| Chromoly Valve Spring Retainers: Set 8 4015 | 19.99 | ||
| Aluminum Alloy Valve Spring Retainers, Set of 8 4016 | 19.99 | ||
| Stock Valve Spring Retainers, 1200-1600cc Each 98-1964B 113-109-641B | 1.99 | ||
| Valve Locks, 8 pairs 4044 | 5.99 | ||
| Valve Guide silicone Bronze. for 8mm intake & Exhaust, each 4002 | 4.99 | ||
| Spark Plug Thread Repair Inserts, 14,, - 1/2" reach, Set of 4 4013 | 4.99 | ||
| Tap & Reamer Tool 5716 | 39.99 | ||
| HI-PERFORMANCE ROCKER SHAFT KITS: Increase the RPM potential of your engine and get more power. This kit eliminates rocker shaft side play that causes rocker arm galling, clip and washer failure. | |||
| Hi performance /High strength Rocker shaft kit includes precision ground high strength shafts, with solid steel center spacer and shims. All necessary hardware is included. 21-2309 | 39.99 | ||
| Hi performance Rocker shaft kit, is similar to the one listed above, but has a floating aluminum center spacer which allows for the fine tuning of rocker arm geometry and positioning. All necessary hardware is included. 21-2308 | 39.99 | ||
| HIGH RATIO ROCKERS: Made from forged chromoly and then precision ground and heat treated. they are drilled through on the alloy adjusting screws so both screws and rocker arms are fully lubricated. All shafts, blocks and shims are high strength alloy as well .Precision ground bronze bushings with through hole lubrication ensures that premature failure of the old needle bearing rocker arm design is a thing of the past. Chromoly rocker arm studs are provided to complete this kit and made installation and use a trouble free experience. | |||
| 1.25 Rocker Arms, w. Bushing, Set 21-2162 | 109.00 | ||
| 1.40 Rocker Arms, w. Bushing, Set 21-2164 | 109.00 | ||
| Replacement Adjustment Screw Only, Each 21-2170 | 5.99 | ||
| HARDENED VALVE LASH CAPS: set of 8 #4006 | 9.99 | ||
| 1.25 RATIO ROCKER ARMS: An easy way to get more power and acceleration from any 1200-1600 engine. No special modifications are needed, the 1.25's work with stock rocker shafts, push rods and adjusters or with our hi performance shafts and swivel foot adjusters. The 1.25 Rocker Arms will not affect cam duration, bottom end performance or reliability and can be run with stock carburetors. Quick and easy to install set of 8 #21-2312 | 79.99 | ||
| O.E Type Valve adjusting screw/Nut kit, set of 8 #21-2313 | 17.99 | ||
| CHROMOLY ROCKER STUDS: a must have for your performance dual valve spring heads. Set of 4 # 21-2314 | 12.99 | ||
| H.D. Swivel Head Valve Adjusters, Set of 8 #21-2031 | 29.99 | ||
| Bsll Foot Swivel Valve Adjusters, Set of 8 #4061 | 24.99 | ||
| ROCKER ARM SHIMS | |||
| Rocker Arm Shims, .015", Set of 4 21-2315 | 3.99 | ||
| Rocker Arm Shims, .030", Set of 4 21-2330 | 3.99 | ||
| Rocker Arm Shims, .060", Set of 4 21-2360 | 3.99 | ||
| ROCKER SHAFT SHIMS | |||
| Rocker Shaft Shims, .010", set of 8 4058 | 5.99 | ||
| Rocker Shaft Shims, .015", set of 8 4055 | 5.99 | ||
| Rocker Shaft Shims, .030", set of 8 4056 | 5.99 | ||
| Rocker Shaft Shims, .060", set of 8 4057 | 5.99 | ||
| Rocker Arm Shim Kit, 12 pcs. Includes 4pc. each of .015:, .030" and .060" 21-2310 | 8.99 | ||
| HI PERFORMANCE PUSH RODS: Made from the highest quality heat treated 5/16" steel tubing, ends are pre installed and push rods are 11.078" overall length. fitsl 1300-1600cc Set of 8 4033 | 39.99 | ||
 |
|||
| CHROMOLY PUSH RODS: Chromoly push rods are lighter and stronger than regular steel push rods. The 3/8 tubing offers maximum strength to maintain no flex operation at higher RPM's under the stress of high lift cams and high rev valve springs. | |||
| Cut to Length, 11.600" Long 3/8" Chromoly Push Rods, Set of 8 4034 | 49.99 | ||
| Stock Length 11.078" Long, 3/8 Chromoly Push Rods, Set 0f 8 4035 | 49.99 | ||
| Stock Pushrod Tube, Fits all 1300-1600cc Each 311-109-335 8522-1 | 2.50 | ||
| Stainless Steel Push Rod Tube without seals, Each 8520 | 5.99 | ||
| Stainless Steel Push Rod Tube without seals, Set of 8 8521 | 39.99 | ||
| Stainless Steel WINDAGE Push Rod Tube without seals, Each 8530 | 7.99 | ||
| Stainless Steel WINDAGE Push Rod Tube, without seals set of 8 8531 | 39.99 | ||
| Silicone Push Rod Tube Seal kit, 16 pcs. 113-109-345AS 9153 | 7.99 | ||
| Stock Push Rod Tube Seal kit, 16 pcs 9150 | 3.99 | ||
| Stock Push rod Tube Seal, 16 pcs Elring | 7.99 | ||
| Request photos anytime for a product at vwmotors@aol.com I will be happy to send to you. Please allow 3- 5 days for special orders | |||
| HI PERFORMANCE ALUMINUM PUSH ROD TUBES:These billet aluminum machine finish push rod tubes have been designed to the specific requirements of hi performance engine building. Features include two piece spring tensioned tubing that expands and contracts with engine, dual viton o-ring seals between the tubes, stock type end seals, plus they have an inner tube diameter of 7/8" at the head end for maximum push rod clearance | |||
| Hi performance aluminum push rod tubes, Each 4108 | 9.99 | ||
| Hi performance aluminum push rod tubes, set of 8 4109 | 64.99 | ||
| Replacement-ring Set for the hi performance pushrod, 16 pcs. 4110 | 3.99 | ||
| ADJUSTABLE PUSHROD TUBES: Change damaged or leaking push rod tubes in minutes without removing the engine or heads. The center o-ring seal stops oil leaks. Made from heavy duty aluminum for strength and anodized for good looks. fits 1200-1600cc Each 9139 | 9.99 | ||
| Adjustable pushrod tubes without seals each 9139-7 | 8.99 | ||
| Adjustable pushrod tubes without seals, set of 8 9149 | 64.99 | ||
| Replacement o-ring, set of 8 9038 | 2.99 | ||
| ALUMINUM QUICK CHANGE PUSH ROD TUBES: The spring loaded design also allow you to quickly change damaged or leaking push rod tubes with the engine in the car. The heavy duty spring keeps a constant tension for a positive seal. Made from heavy duty aluminum and fully blue anodized for good looks and protection from the elements. Fits all 1200-1600cc w. seals, EACH 9095 | 9.99 | ||
| Quick Change Push Rod tube with seals , set of 8 9096 | 64.99 | ||
| NYLON SELF ADJUSTING PUSH ROD TUBES: The heat resistant high impact design nylon is an economical alternative to the aluminum self adjusting push rod tube and offers the same benefits (black). Fits all 1200-1600cc | |||
| Nylon Push Rod Tube w. Seals, Set of 8 9159 | 19.99 | ||
| Nylon Push Rod Tube without Seals, Set of 8 9159-7 | 17.99 | ||
| Nylon Push Rod Tube w. Seals, Each 9160 | 6.99 | ||
|
VALVE COVERS |
|||
| EMPI HI PERFORMANCE BOLT ON VALVE COVERS: Made from investment cast aluminum, with cast in EMPI logo and polished ribs on a black background. The finned design helps in reducing upper cylinder head temperature and there is enough clearance for most high lift rocker arms. It also has a boss that can be drilled for venting to a breather box. The special Channel Type seals and stud seals insure positive sealing. Complete with all gaskets and hardware. 8852 | 59.99 | ||
| Replacement channel gaskets, pair 8868 | 7.99 | ||
| Replacement hardware kit 8897 | 8.99 | ||
| BOLT ON ALUMINUM VALVE COVER SET: Cast aluminum covers are great for off road use, where the bale/clip type may come loose. The oring stud seals prevent oil sepage. Clearanced for use with hi lift rockers. Use with stock cork/rubber gaskets or with our high quality reusable neoprene gaskets. 9152 | 27.99 | ||
| Replacement Hardware kit for Bolt on 9086 | 5.99 | ||
| Replacement O'ring seals only , set of 4 9087 | 2.99 | ||
| Neoprene Valve cover gaskets, Pair 9088 | 5.99 | ||
| CLIP ON ALUMINUM VALVE COVERS: Cast and polished aluminum with cool fins to increase heat dissipation from the upper head area. Includes chrome bales and clips and cork/rubber gaskets set 9138 | 27.99 | ||
| Replacement chrome bales & clips pair 9089 | 5.99 | ||
| Neoprene Valve cover gaskets, Pair 9088 | 5.99 | ||
| Stock style valve cover gaskets Cork | 5.99 | ||
| STAINLESS STEEL VALVE COVERS: Stamped stainless steel then polished to high luster. Clearanced for use with most Hi lift Rockers. Includes chrome bales and cork/rubber gaskets, pair 16-9467 | 39.99 | ||
| Chrome bales for the stainless steel valve covers pair 16-9468 | 7.99 | ||
| Stock Style Valve covers with bales Black , pair | 22.99 | ||
| Stock Style Valve covers with bales, Chrome, pair 8905 | 19.99 | ||
| Replacement stock chrome bales/clips, pair 8906 | 5.99 | ||
| VALVE COVER VENTS: Decrease crankcase pressure, eliminate blow by and reduce oil loss with these easy to install valve cover vents. Features our Sure seal o ring system. Vent into air cleaner or breather box. 9164 pair | 5.99 | ||
| Complete Engine Oil Breather kit. 8544 | 27.99 | ||
| BOLT ON ALUMINUM VALVE COVERS FOR 1700-2000CC: Set with gaskets and hardware 8855 | 79.00 | ||
| Replacement Valve cover gaskets, pair 98-0148 | 5.99 | ||
|
|
|
Description |
Rebuilt |
New |
Core |
| UPDATED 11-18-09 | |||
| PRICES SUBJECT TO CHANGE WITHOUT NOTICE | |||
|
85.5mm Cylinder Bore QGAP HEAD |
|
$ 199.00 |
|
|
92mm Cylinder Bore QGAP HEAD |
|
229.00 |
|
|
94mm Cylinder Bore QGAP HEAD |
|
229.00 |
|
|
042 Heads 40mm Intake x 35.5mm Exhaust |
|
Description |
Rebuilt |
New |
Core |
| UPDATED 11-8-09 | |||
| PRICES SUBJECT TO CHANGE WITHOUT NOTICE | |||
|
85.5mm QGAP HEAD |
|
$ 229.00 |
|
|
92mm QGAP HEAD |
|
249.00 |
|
|
94mm QGAP HEAD |
249.00 |
||
|
EMPI PERFORMANCE CYLINDER HEADS: Feature cast in large intake and exhaust ports and 3/4 reach 12mm spark plug bosses. Our performance heads are stronger then stock heads and have extra material around the combustion chambers. They are assembled with stainless steel 40 mm intake and 35.5 mm exhaust valves and either single high rev. valve springs or high rev dual valve springs. All seats are cut to proper angle. Both versions come with chromoly retainers. Also available bare. |
|||
| Bare Cylinder Head 98-1341B |
219.00 |
||
|
Complete Cylinder Head, w. Single High Rev Valve
Springs each: 98-1342B
|
259.00 |
||
| Complete Cylinder Head, w. Dual High Rev Valve Springs each: 98-1344B |
269.00 |
||
|
EMPI BIG BORE PERFORMANCE CYLINDER HEADS These big valve performance heads are now available fly cut and precision machined for 90.5, 92 and 94mm Bore . Available bare or complete with big stainless steel 40mm intake valves and 35.5 mm exhaust valves and with single high rev. valve springs or dual high rev valve springs. All seats are cut to proper angle. All heads are equipped with chromoly retainers. |
|||
| Bare cylinder head for 90.5 & 92mm 98-1360B | 229.00 | ||
| Complete Cylinder Head w. Single High rev Valve Springs for 90.5 & 92mm 98-1361B | 269.00 | ||
| Complete Cylinder Head w. Dual High rev Valve Springs for 90.5 & 92mm 98-1362B | 279.00 | ||
| Bare cylinder head for 94mm 98-1365B | 239.00 | ||
| Complete Cylinder Head w. Single High rev Valve Springs for 94mm 98-1366B | 279.00 | ||
| Complete Cylinder Head w. Single High rev Valve Springs for 94mm 98-1367B | 289.00 | ||
|
EMPI HI PERFORMANCE CYLINDER HEADS WITH COMPETITION VALVE JOB: This upgraded version of our Big Bore Performance head was developed as a result of an increasing demand for an out of the box head that outperforms the competition. This version is designed for the individual who does not have the time, equipment or knowledge to perform a proper competition valve job, just bolt them on and go. All four versions come with the same valves and hardware as the Big Bore Performance Heads above. |
|||
Complete Hi Performance Head, Single Springs for
90.5 and 92mm 98-1371B
|
299.00 | ||
| Complete Hi Performance Head, Dual Springs for 90.5 and 92mm 98-1372B | 329.00 | ||
| Complete Hi Performance Head, Single Springs for 94mm 98-1376B | 329.00 | ||
| Complete Hi Performance Head, Dual Springs for 94mm 98-1377B | 339.00 | ||
|
|
|
Hi-Performance Big Valve Heads 044 |
|
Description |
Rebuilt |
New |
Core |
| HAS NOT BEEN UPDATED 11-18-09 | |||
| PRICES SUBJECT TO CHANGE WITHOUT NOTICE | |||
|
85.5mm |
$ 249.00 |
||
| 92mm; 044 42x37.5 : Dual Spring |
269.00 |
||
|
92mm; 044 42x37.5 ; Dual Springs Port & Polished |
349.00 |
||
| 94mm; 044 42x37.5 : Dual Spring |
269.00 |
||
| 94mm; 044 42x37.5 ; Dual Springs Port & Polished |
349.00 |
||
|
94mm; 044 40x36; Dual Springs |
299.00 |
||
|
|
|||
|
Super Mag Heads 42 x 37.5 mm w/Dual Spring/Port & Pol |
359.00 |
||
|
TYPE II VW Heads |
| HAS NOT BEEN UPDATED 10-27-09 | |||
|
Description |
Rebuilt |
New |
Core |
| PRICES SUBJECT TO CHANGE WITHOUT NOTICE | CORE REFLECTS REBUILTS ONLY | ||
|
63 - 70, 1500 cc/1600 cc, Single Port |
$ 139.00 |
CALL |
$ 15.00 |
|
71, 1500 cc/1600 cc, Dual Port |
139.00 |
199.00 |
.00 |
|
72 - 73, 1700 cc |
249.00 |
00 |
50.00 |
|
74 - 75, 1800 cc |
249.00 |
399.00 |
50.00 |
|
76 - 78, 2000 cc (roundport) |
249.00 |
399.00 |
50.00 |
|
79 - 83, 2000 cc (squareport) |
249.00 |
399.00 |
50.00 |
| (2.0 Engine Rebuilding Gasket kit 129.00) |
50.00 |
||
|
83 - 85, 1900 cc, Waterboxer |
249.00 |
399.00 |
70.00 |
|
86 - 90, 2100 cc, Waterboxer |
249.00 |
399.00 |
70.00 |
|
|
|
Description |
Price |
| UPDATED 11-18-09 | |
| PISTON AND CYLINDER SETS: The pistons are Forged and the cylinders are extra thick for superior strength. Designed to perform even with turbo charged and nitrous injected engines. all sets include piston rings, piston pin and retaining clips. (Note Best when used with Teflon Piston Pin Retainer Buttons) | |
 |
|
|
Mahle 85.5mm 1500-1600cc 311-198-069F 98-7969B |
189.00 |
| Mahle 87 mm X 69mm Stroke 98-1986B | 229.00 |
| Mahle 94mm, 2.0 Liter Type 4 129-198-075, 98-1982B | 289.00 |
|
Cofap 94mm, 1.9 Liter Waterboxer Piston and cylinders 025-198-075, 98-1980B |
239.00 |
|
Cofap 94mm, 2.1 Liter Waterboxer Piston and cylinders 025-198-075D, 98-1981B |
239.00 |
|
BOLT ON BIG BORE PISTON & CYLINDERS W. FORGED PISTONS |
|
| Mahle 85.5mm x 69mm Stroke, Forged 98-1985B | 259.00 |
| Mahle 87mm x 69mm Stroke, Forged 98-1987B | 269.00 |
| Mahle 88mm x 69mm Stroke, Forged 98-1988B | 269.00 |
|
MACHINED TYPE BIG BORE PISTON AND CYLINDERS W. FORGED PISTONS |
|
| Mahle 85.5mm x 69mm Stroke, Forged 98-1989B | 259.00 |
| Mahle 90.5mm x 69mm Stroke, Forged 98-1990B | 279.00 |
| Mahle 90.5mm x 82mm Stroke, Forged 98-1991B | 279.00 |
| Mahle 92mm x 69mm Stroke, Forged 98-1992B | 279.00 |
| Mahle 92mm x 82mm Stroke, Forged 98-1993B | 279.00 |
| Mahle 94mm x 69mm Stroke, Forged 98-1994B | 279.00 |
| Mahle 94mm x 82mm Stroke, Forged 98-1995B | 279.00 |
| GRANT PISTON RING SETS: All Grant Piston Rings are made in the USA and feature cast top rings and chrome second rings. Complete set | |
|
|
|
| Piston Ring Set, 85.5mm, 1600cc (2 x 2 x 5mm) 311-198-169A, 98-1169B | 22.99 |
| Piston Ring Set, 87mm, (2 x 2 x 5mm) 311-198-169 87, 98-1187B | 22.99 |
| Piston Ring Set, 88mm, (1.5 x 1.5 x 5mm) 311-198-169 88, 98-1188B | 22.99 |
| Piston Ring Set, 90.5mm, (1.5 x 2 x 4mm) 311-198-169 90, 98-1190B | 22.99 |
| Piston Ring Set, 90.5mm, (2 x 2 x 4.8mm) 311-198-169 91, 98-1191B | 22.99 |
| Piston Ring Set, 92mm, (1.5 x 2 x 4mm) 311-198-169 92, 98-1192B | 22.99 |
| Piston Ring Set, 94mm, (1.5 x 2 x 4mm) 311-198-169 94, 98-1194B | 22.99 |
| Piston Ring Set, 94mm, (2 x 2 x 4mm) 311-198-169 95, 98-1195B | 22.99 |
| TEFLON PISTON PIN RETAINER BUTTONS: Easy press in installation. 8 piece set Buttons may fit tight in different manufacturers wrist pins | |
| Teflon Retainer buttons, 85.5mm, Set of 8 4070 | 14.99 |
| Teflon Retainer buttons, 87/88mm, Set of 8 4071 | 14.99 |
| Teflon Retainer buttons, 90.5mm, Set of 8 4073 | 14.99 |
| Teflon Retainer buttons, 92mm, Set of 8 4074 | 14.99 |
| Teflon Retainer buttons, 94mm, Set of 8 4075 | 14.99 |
|
|
|
Type II, 72 - UP |
|
Description |
Rebuilt |
New |
Core |
| PRICES SUBJECT TO CHANGE WITHOUT NOTICE | |||
| 94 mm, 1800 cc | 239.00 | ||
|
94 mm, 2000 cc |
.00 |
239.00 |
.00 |
|
94 mm, 1.9 Waterboxer |
.00 |
239.00 |
.00 |
|
94 mm, 2.1 Waterboxer |
.00 |
259.00 |
.00 |
|
|
|
Description |
|
Core |
| PRICES SUBJECT TO CHANGE WITHOUT NOTICE | ||
| UPDATED 11-18-09 | ||
|
Type I, II & III, 1600 cc Stock 4 dowel (Reground) |
39.00 |
30.00 |
| Type I, II & III, 1600 cc Stock 4 dowel NEW | 159.99 | |
| NEW 69mm Crankshaft Counterweighted NEW | 179.00 | |
|
70 - 75, Type II & IV, 1700 cc/1800 cc ( Reground) |
79.00 |
30.00 |
| Type IV 2000cc (Reground) | 89.00 | 100.00 |
|
83 - 85, Waterboxer 1.9 (Reground) |
99.00 |
100.00 |
|
86 - 89, Waterboxer 2.1 (Reground) |
99.00 |
200.00 |
|
NEW |
||
|
NEW 4340 CHROMOLY STROKER CRANKSHAFTS: Multiple die stamp forged from 4340 chromoly . Cranks are then magna fluxed, shot peened and all journals are nitrided, precision ground and micro polished. Also cross drilled, chamfered oil holed, dynamically computer balanced and extra long 8mm dowel pins. Choose the journal size and combination for you. |
||
| NOTE: Stroker Cranks require machining of case and possibly other internal components, for rod clearance | ||
| 76 Stroker Counterweighted Crankshaft, VW Journals 8180 | 299.00 | |
| 78 Stroker Counterweighted Crankshaft, VW Journals 8181 | 299.00 | |
| 82 Stroker Counterweighted Crankshaft, VW Journals 8182 | 350.00 | |
| 76 Stroker Counterweighted Crankshaft, Chevy Journals 8185 | 299.00 | |
| 78 Stroker Counterweighted Crankshaft, Chevy Journals 8186 | 299.00 | |
| 82 Stroker Counterweighted Crankshaft, Chevy Journals 8187 | 350.00 | |
| 84 Stroker Counterweighted Crankshaft, Chevy Journals 8188 | 350.00 | |
|
NEW |
||
| 4140 CHROMOLY CRANKSHAFTS: Counterweighted Crankshafts greatly reduce power robbing and damaging crank-flex, high RPM harmonics and vibration through the entire power range. These are Precision Ground, Micro Polished and Balanced. Forged from 4140 chromoly, Radiused Standard/Standard journals, Chambered oil holes and Cross Drilled. Available in stock 69mm stroke or 74 mm stroker versions. Both use stock VW main and rod bearings. | ||
| 69mm Counter weighted Crankshaft 8120 | 259.00 | |
| 74mm Counter weighted Crankshaft 8121 | 259.00 | |
| NEW DIRECT DRILLED CRANKSHAFT: 69MM DIRECT DRILLED forces the oil in one direction for better full flow lubrication 98-1510B | 169.00 | |
| CRANKSHAFT INSTALLATION KIT: 7pc Includes new timing gear, distributor drive pinion, oil slinger, retaining clip and woodruff keys. Fits 1200 thru 1600cc 8105 | 74.99 | |
| Timing Gear, 1200-1600cc 113-105-209, 98-1520B | 24.99 | |
| Distributor drive gear, 1200-1600cc, 111-105-223, 98-1523B | 22.99 | |
| Distributor drive Pinion, 1200-1600cc, 113-105-231B, 98-1531B | 49.99 | |
| Oil slinger, 1200-1600cc, 113-105-241A, 98-1541B | 1.99 | |
| Retaining Clip, 1200-1600cc, 111-105-227, 98-1527B | 1.99 | |
| Woodruff key, timing gear, 1200-1600cc 111-105-213, 98-1521B | 2.99 | |
| Woodruff key, Crank pulley 1200-1600cc 113-105-249 98-1549B | 3.99 | |
| COMPETITION LENGTH CRANKSHAFT DOWEL PINS: These longer length sowel pins fit deeper into the crankshaft to protect against shearing under high twist loads. Crankshaft may have to be drilled deeper to accept longer dowel pins. Set of 8 | ||
| 8mm Competition dowel pin set of 8 8140 | 16.99 | |
| 11/32" competition dowel pin, set of 8 8141 | 16.99 | |
| 8 Hole Paper Gasket, Pack of 10 8142 | 5.99 | |
| PERFORMANCE CRANKSHAFT GEAR SPACER: 16-9522 | 11.99 | |
| Crankshaft & Flywheel Drill Fixture 5004 | 4.99 |
| Note: Core charge (Core needed on all crankshafts) |
|
Description |
|
|
| UPDATED 11-18-09 | ||
| PRICES SUBJECT TO CHANGE WITHOUT NOTICE | ||
| New Connecting Rods, 1300-1600cc set of 4 311-105-401B 98-0153B |
109.00 |
|
 |
||
| 4340 CHROMOLY H-BEAM RODS: 4340 Construction. radiused rod caps help reduce the amount of clearancing required on stroker applications and are sleeved to the rod to eliminate cap shifting. Precision machined rods are magna fluxed and sold in matched weight sets of 4. All held together with forged 8740 ARP 5/16 bolts capable of withstanding 200,000 psi tensile load. Torque to 30 ft. lbs. | ||
| H-Beam Rods, 5.400" Length, VW Journal 2.165"/55mm (ARP bolts) set of 4 8310 | 229.00 | |
| H-Beam Rods, 5.500" Length, VW Journal 2.165"/55mm (ARP bolts) set of 4 8311 | 229.00 | |
| H-Beam Rods, 5.600" Length, VW Journal 2.165"/55mm (ARP bolts) set of 4 8312 | 229.00 | |
| H-Beam Rods, 5.400" Length, Chevy Journal 2.000/51mm (ARP bolts) set of 4 8320 | 229.00 | |
| H-Beam Rods, 5.500" Length, Chevy Journal 2.000/51mm (ARP bolts) set of 4 8321 | 229.00 | |
| H-Beam Rods, 5.600" Length, Chevy Journal 2000/51mm. (ARP bolts) set of 4 8322 | 229.00 | |
| H-Beam Rods, 5.700" Length, Chevy Journal 2.000/51mm (ARP bolts) set of 4 8323 | 229.00 | |
| Chevy Journal Rod Bearings, Standard 8301 | 24.99 | |
| Chevy Journal Rod Bearings, .010 8302 | 24.99 | |
| Chevy Journal Rod Bearings, .020 8303 | 24.99 | |
| Chevy Journal Rod Bearings, .030 8304 | 24.99 | |
| ARP 2000 H-Beam 5/16" Rod bolts Only, Set of 8 8308 | 74.99 | |
| EMPI H-Beam 5/16" rod Bolts Only, set of 8 8309 | 34.99 | |
| 4140 CHROMOLY I BEAM RODS: These I- Beam rods use the O.E. design but are forged from 4140 chromoly to give you a high strength and reliability necessary for this rod design. Radiused caps aid in Stroker clearancing. Three different sizes cover most all of the popular engine applications. Torque these 3/8" to 39ft. lbs. Matched weighted set of 4 | ||
| I-Beam Rod 5.394", VW Journal 2.165"/55mm (EMPI Rod Bolts) set of 4 8340 | 159.00 | |
| I-Beam Rod 5.000", VW Journal 2.165"/55mm (EMPI Rod Bolts) set of 4 8341 | 159.00 | |
| I-Beam Rod 5.000", Chevy Journal 2.000"/55mm (EMPI Rod Bolts) set of 4 8351 | 159.00 | |
| I-Beam Rod 5.394", VW Journal 2.165"/55mm w. 5/16" (EMPI Rod Bolts) 4 8341 | 159.00 | |
| ARP 8740 3/8" I- Beam Rod bolts only set of 8 8355 | 59.99 | |
| EMPI Replacement 8740 3/8" I-Beam Rod Bolts ONLY set of 8 8356 | 34.99 | |
|
|
|
Description |
|
New |
| PRICES SUBJECT TO CHANGE WITHOUT NOTICE | ||
| Updated 11-8-09 | ||
| Stock Replacement Camshaft | ||
| Stock Cam w. Flat gear, 1300-1600cc 66-70 113-109-021D 98-1920B | 64.99 | |
| Stock Cam w. Dished Gear, 1600cc, 71-79 113-109-021G 98-1921B |
64.99 |
|
| ENGLE HI-PERFORMANCE CAMSHAFTS: Race proven in some of the fastest VW's. Engle cams feature billet strength and reliability. Engle offers the widest choice of Performance Cam Grinds. | ||
| CAMS WITH GRINDS FOR 1.1 OR 1.25 RATIO ROCKERS | ||
| Application lift(1.1) Duration Cam Lift Dur.@.050 Lobe Cent. | Part# | |
| Street/Dune Bug .420" 276 .383" 236 108 | W100 | 99.00 |
| Hot Street/off road .430" 284 .392" 247 108 | W110 | 99.00 |
| Hot Street/off rd. comp .430" 284 .392" 247 108 | W120 | 99.00 |
| Drag/off road comp. .430" 284 .392" 247 108 | W125 | 99.00 |
| Drag/off road comp .430" 284 .392" 247 108 | W130 | 99.00 |
| Comp.Drag/off road .430" 284 .392" 247 108 | W140 | 99.00 |
| CAMS WITH HIGH LIFT GRINDS FOR 1.1 RATIO ROCKERS | ||
| Application lift(1.1) Duration Cam Lift Dur.@.050 Lobe Cent. | Part# | |
| Sm disp/off road comp .430" 284 .392" 247 108 | VZ 14 | 110.00 |
| Med disp/off road comp .430" 284 .392" 247 108 | VZ 15 | 110.00 |
| Midget/Crc.trk/off road .430" 284 .392" 247 108 | VZ 25 | 110.00 |
| Comp. drag only/off road.430" 284 .392" 247 108 | VZ 30 | 110.00 |
| Comp. drag only/off road.430" 284 .392" 247 108 | VZ 35 | 110.00 |
| EMPI BILLET 28MM LIGHTWEIGHT PERFORMANCE LIFTERS: Mde from 1 piece chromoly billets and the precision ground and heat treated. These are the lightest and strongest lifters. In addition the fifter is availble with an oil hole in the face for extra lubrication for those high load, hi performance applications. | ||
| Billet 1 piece lifters, 28mm w.o Oil hole set of 8 21-4300 | 35.99 | |
| Billet 1 piece lifters, 28mm with Oil hole set of 8 21-4304 | 37.99 | |
| Billet 1 piece lifters, 30mm w. oil hole , Set of 8 21-4305 | 37.99 | |
| Billet 1 piece Lifters, 30mm w.o Oil Hole , Set of 8 21-4306 | 37.99 | |
| 31mm HIGH PERFORMANCE CAM LIFTERS; 31 mm surface contact Lifters have 15% more contact area then stock lifters to reduce scuffing and early lobe wear. Made from one piece billets and precision ground. Set of 8 with Oil Hole 21-4302 | 37.99 | |
| EMPI STRAIGHT CUT ADJUSTABLE CAM GEAR SET: Steel cam and crank gear set with straight cut teeth creates less drag for increased horswpower. The Set: Includes 5/16" -24 SAE Grade 8 bolts and washers for easy installation Fits all 1200-1600cc type 1/2/3 21-2515 |
109.00 |
|
| ADJUSTABLE CAM GEAR SET: Allows you to easily dial in your cam timing with the offset washers. The gear is precision machined from high quality aluminum and the kit includes special washers and 5/16"-24 SAE Grade bolts. Fits all 1200-1600cc Type 1/2/3 21-2510 | 49.99 | |
| Bolt on Cam gear 21-2500 | 29.99 | |
| Cam Gear Bolts, Set of 3 use these for part # 21-2500 21-4310 | 3.99 | |
| MOLY ASSEMBLY LUBE: Applied to all bearing surfaces, cam and cam followers during assembly, this high grade moly lube insures proper lubrication upon initial engine start up and run in. 2 oz. tube 27-0158 |
9.99 |
|
| THE FOLLOWING HAS NOT BEEN UPDATED 10-27-09 | ||
|
72 - 77, 1700 cc-1800cc - 2000 cc, Late Type II & IV (Solid Lift) |
69.00 |
50.00 |
|
78 - 83, 2000 cc, Vanagon |
69.00 |
50.00 |
|
83 - ON, 1.9 - 2.1, Waterboxer on OEM Billet Hyd |
69.00 |
50.00 |
|
110 Reground Cam; lift=.430 duration=284 |
39.99 |
10.00 |
|
Web Cam; Lift=421 duration=275 |
34.99 |
10.00 |
| Set of Lifter Orginal German 2.0 or Waterboxer set of lifters |
159.00 |
|
|
Description |
||
| PRICES SUBJECT TO CHANGE WITHOUT NOTICE | ||
| Not Updated 11-18-09 | ||
| New Stock Flywheel, 200mm 12v, 130 teeth, O ring style fit Type 1/2/3 1300 thru 1600cc 311-105-273A | 89.99 | |
| New 12v, 200mm, 8 dowell pin, Lightened Flywheel 13 lbs. 311-15-273HP | 109.99 |
|
| Inquire on the resurfaced stock flywheels 909-391-6979 | ||
| CHROMOLY RACING FLYWHEEL: One piece chromoly construction and offset 8 dowell hole pattern , fully balanced, approx 13 lbs, 12v, 200mm 4099 |
139.00 |
|
| Chromoly Flywheel , 12 v. 200mm, drilled and supplied with 11/32 dowel pins 4100 |
99.00 |
|
| GLAND NUT & WASHER KIT 4029 | 14.99 | |
| Washer only 4030 | 5.99 | |
| CHROMOLY GLAND NUT W. WASHER 4026 | 27.99 | |
| Vanagon H2O Resurfaced Flywheel |
139.00 |
|
|
Description |
Price |
| PRICES SUBJECT TO CHANGE WITHOUT NOTICE | |
| THE FOLLOWING HAS BEEN UPDATED 11-18-09 | |
|
OIL PUMPS |
|
| STOCK STYLE heavy duty oil pump 111-115-107AHD,1500cc-1600cc, thru 70, 26mm gears 98-1157 B | 39.99 |
| STOCK STYLE heavy duty oil pump 111-115-107AHP 1500cc-1600cc, thru 70, 30mm gears 98-1158 B | 39.99 |
| STOCK STYLE heavy duty oil pump 111-115-107BHD 1500cc-1600cc, from 71, 30mm gears 98-1159 B | 39.99 |
| Oil Pump Cover Only, Stock Style 9148-7 | 4.99 |
| MELLING HEAVY DUTY OIL PUMPS: The Melling Heavy duty pump is made from cast iron and has gears that are 38% larger than stock. GENUINE MELLING.Complete with gasket and studs. | |
| MELLING heavy duty oil pump 1200-1300cc, thru 66, 6mm studs 31-2901 | 89.99 |
| MELLING heavy duty oil pump 1300-1500cc, thru 70, 8mm studs (flat cam gear) 31-2955 | 84.99 |
| MELLING heavy duty oil pump 1600cc, from 71, 8mm studs (dish cam gear) 31-2950 | 89.99 |
| FULL FLOW FILTER PUMPS: These High capacity pumps provide added oil pressure, increased oil volume and oil cooling. the filter cleans the oil 100% of the time. Kit includes filter and all necessary hardware. | |
| Pump w. Filter 1300-1600cc, thru 70,flat cam gear, Includes 6 & 8 mm Bolts 9206 | 59.99 |
| Pump w. Filter 1600cc, from 71, dish cam gear, Includes 8mm Bolts 9207 | 59.99 |
| Replacement Oil Filter 9208 | 9.99 |
| Replacement 6mm Mounting bolts, set of 4 9286 | 3.99 |
| Replacement 8mm Mounting bolts, set of 4 9287 | 3.99 |
| Replacement Gasket between the Covcer and Pump, Each 9207-5 | .99 |
| Replacement Gasket between Pump and Engine case, Each 9207-4 | .99 |
| FILTER FLOW OIL PUMP: Add a conventional oil filter to your engine with this 26mm oil pump with 1/4" NPT tapped inlet and outlet. For use with Flat Cam gear to 1970. Please use our part# 9215 with this unit. 16-9702 | 54.99 |
| 1/4" Male NPT w. 1/2" hose barb, pack of 2 9215 | 4.99 |
| EMPI BILLET ALUMINUM OIL PUMP COVER: 8mm Full Flow 31-2942 | 24.99 |
| Empi Billet aluminum oil pump cover, 8mm with out full flow fitting 31-2943 | 13.99 |
| Oil Pump Cover with Fitting and Gasket, Aluminum 9226 | 11.99 |
| Oil Pump Cover Only, stock style 9148-7 | 4.99 |
| Oil Pump Cover with fitting and gasket, STEEL 31-2940 | 21.99 |
|
OIL COOLER KITS |
|
| EMPI COMPETITION ENGINE OIL COOLERS: The Ultimate in cooling efficiency. the EMPI stacked plate design offers maximum cooling with almost bulletproof strength. Aircraft quality aluminum, flux-less oven brazed construction. Cross path airflow effectively cools oil as air passes through as many as 16 paths across sturdy embossed plates. Insignificant pressure drop, twice the cooling in half the size! Painted black for fast heat dissipation. Fitted with 1/2 half female pipe thread pitting. MOUNTING DAMPNERS ARE RECOMMENDED | |
| EMPI COMPETITION ENGINE OIL COOLER: 96 plate cooler only 1 1/2"x11"x 11" 9267 | 94.99 |
| EMPI COMPETITION ENGINE OIL COOLER:72 plate cooler only 1 1/2"x8"x 11" 9265 | 74.99 |
| EMPI COMPETITION ENGINE OIL COOLER:48 plate cooler only 1 1/2"x5 3/4"x 11" 9271 | 64.99 |
| EMPI COMPETITION ENGINE OIL COOLER:24 plate cooler only 1 1/2"x3"x 11" 9273 | 44.99 |
| Cooler Mounting Dampers, set of 4 9259 | 11.99 |
| COMPETITION ENGINE OIL COOLER KITS: Complete Kit includes Oil Cooler, by pass adapter, Remote Filter Bracket, High Temp Hose and all fittings required for installation. fits all type I and Type 2 thru 71. | |
| COMPETITION ENGINE OIL COOLER KIT 96 Plate 9261 | 105.00 |
| COMPETITION ENGINE OIL COOLER KIT 72 Plate 9264 | 89.99 |
| COMPETITION ENGINE OIL COOLER KIT 48 Plate 9270 | 79.99 |
| COMPETITION ENGINE OIL COOLER KIT 24 Plate 9272 | 69.99 |
| UNIVERSAL COMPETITION ENGINE OIL COOLER KIT:Complete Kits include Cooler, By pass or "Sandwich adapter with 3/4" x 16 Nipple, Remote Filter Bracket, High Temp Hose and all fittings required for installation on your type 4, Rabbit jetta and a host of other applications. The by pass adaptor is for remote mounting of the oil filter. The Sandwich adaptor fits between stock filter mount and filter. | |
| UNIVERSAL COMPETITION ENGINE OIL COOLER KIT 96 Plate w. By pass adaptor 9262 | 119.00 |
| UNIVERSAL COMPETITION ENGINE OIL COOLER KIT 72 Plate w. By pass adaptor 9263 | 110.00 |
| UNIVERSAL COMPETITION ENGINE OIL COOLER KIT 48 Plate w. By pass adaptor 9294 | 99.00 |
| UNIVERSAL COMPETITION ENGINE OIL COOLER KIT 24 Plate w. By pass adaptor 9295 | 89.00 |
| UNIVERSAL COMPETITION ENGINE OIL COOLER KIT 96 Plate w. Sandwich adaptor 9218 | 129.00 |
| UNIVERSAL COMPETITION ENGINE OIL COOLER KIT 72 Plate w. Sandwich adaptor 9217 |
119.00 |
| UNIVERSAL COMPETITION ENGINE OIL COOLER KIT 48 Plate w. Sandwich adaptor 9278 | 99.00 |
| UNIVERSAL COMPETITION ENGINE OIL COOLER KIT 24 Plate w. Sandwich adaptor 9299 | 89.00 |
| EMPI HI PERFORMANCE ENGINE OIL COOLER: Features 1/2 copper tubing, aluminum cooling fins and mechanical expansion construction for maximum heat dissipation with The least amount of pressure drop. Available w. 1/2 Male threaded ends or 1/2 Hose Barb ends. | |
| 8 PASS EMPI HI PERFORMANCE ENGINE OIL COOLER KIT: Includes Cooler, by pass adaptor, Remote Filter Bracket, High Temp Hose and all necessary fittings and hardware for installation on your Vw fits all Type I and Type 2 thru 71. | |
| 8 PASS 1/2 Male Threaded Ends boxed, without booster kit 9232 | 79.99 |
| 8 PASS Cooler Only 1/2 Male Threaded fitting 9241 | 59.99 |
| 8 Pass Cooler kit, 1/2" Hose Barb, w. Booster Kit 9233 | 69.99 |
| 8 Pass Cooler Only, 1/2"Hose Barb 9243 | 59.99 |
| 6 PASS OIL COOLERS & KITS: Complete kit includes 6-Pass Cooler, By Pass Adapter, Remote Filter Bracket, High Temperature Hose and all necessary fittings and hardware for installation on you Vw. Fits all Type 1 and Type 2 thru 71. | |
| 6 PASS, 1/2" Hose Barb, with or without Booster Kit 9234 | 59.99 |
| 6 PASS Oil Cooler Only 1/2"Hose Barb 9277 | 39.99 |
| UNIVERSAL 8 PASS OIL COOLER KITS: Complete Kit includes everything you need for installation on your Type 4, Porsche 914, 924, Rabbit, Jetta, Dasher, Scirocco and many others. Your choice of By-pass or Sandwich Adaptor. Cooler is fitted with 1/2 Male fittings. The Sandwich adaptor fits between the stock filter mount and filter. | |
| Universal 8 Pass Oil Cooler Kit, with Bypass Adapter 9291 | 94.99 |
| Universal 8 Pass Oil Cooler Kit, w. Sandwich Adapter 9285 | 99.99 |
| EMPI COMPETITION OIL COOLER & FAN KIT: This is really cool. Ultra rugged and efficient 72 and 96 stacked plate competition coolers just got better. They are now available with a 12v electric fan already mounted and ready to install. Use with an On/Off switch or with an electronic or inline thermostat for worry free operation. | |
| 72 Plate Competition Oil Cooler & Fan Kit 9292 | 129.00 |
| 96 Plate Competition Oil Cooler & Fan Kit 9293 | 149.00 |
| Cooler Mounting Dampers, set of 4 9259 | 14.99 |
| FAN ONLY Replacement for 92-92 OR 9293 9296 | 74.99 |
| Inline Cooler Thermostat, -8AN 1/2"Hose Barb; The Inline Thermostat attaches to the inlet port of the oil cooler or it can be spliced into existing 1/2"hose and it activates at 180F. 33-5721 | 29.99 |
| Electronic Cooler Thermostat: This thermostat features a heavy duty replaceable relay, manual override and color-coded wiring harness for easy installation. Temperature range is adjustable from 150 to 240 F. The thermostatic probe insert into the fins of the cooler 33-6759 | 67.99 |
| HI PERFORMANCE FAN & COOLER KIT: A different version of the popular fan/cooler. Includes black powder coated 16 pass copper tube cooler with 8AN male fittings, 10"reversible electric fan and aluminum clear anodized mounting brackets. 9290 | 189.99 |
| COMPETITION OIL COOLER & AIR SCOOP KIT: Fiberglass roof scoop offers great airflow for your competition or High performance Oil Cooler... and gives your bug that Off-road look. Scoop can be painted to match your car. | |
| Small scoop only, 9274 (Use part # 9271 48 plate cooler) | 199.00 |
| 48 Plate Cooler Only 9271 (for the scoop # 9274) | 69.99 |
 |
|
| UNIVERSAL OIL FILTER & SANDWICH ADAPTERS: Can be used on a number of makes and models, including Type 4 and VW watercooled models. Fitted with 3/4" x 16 Nipple and tapped for 3/8 NPT fittings. | |
| Universal Adapter w. Nipple, for Remote Filter 9229 | 19.99 |
| Universal Sandwich Adaptor w. Special Male/Female Nipple 9247 | 39.99 |
| OIL PRESSURE BOOSTER KIT:Speciall designed larger piston and stronger spring increase oil pressure throughout the system. A must when installing an oil cooler or remote filter. | |
| Single Oil Booster Kit, thru 69 9201 | 3.99 |
| Dual Oil Booster Kit, 70 up 9202 | 4.99 |
| Adjustable Oil Pressure Regulator Kit: Allows you to adjust the oil pressure with the twist of a wrench. Use with stock pressure regulator spring. Each 9198 | 7.99 |
| Oil Pressure Switch, for stock Indicator Light 021-919-081 B 98-9190 | 3.99 |
| OIL COOLER FOR 1300-1600 W. DOGHOUSE SHROUD 5 plate, 113-117-021 98-1161B | 74.99 |
| Doghouse Oil Cooler to Case Adapter/Stand for 98-1161B Only 113-117-303 8894 | 24.99 |
| Oil Cooler, Type 2/4, 1700-2000cc/ 914, 7 Plate 021-117-021B 17-2806 | 99.00 |
| OIL RETURN ADAPTOR KIT: Designed to add a full flow oil system without machining the crankcase. Screws into the rear oil by pass galley (spring & plunger must be removed) and provides the return route for oil from a full flow pump cover. Installs without engine removal 16-9517 | |
| OIL COOLER SEALS PACK OF 4, 8/10MM 111-117-151B 9255 | 2.99 |
| OIL COOLER SEALS PACK OF 4, 10MM LATE 021-117-151A 9256 | 2.99 |
| OIL COOLER SEALS PACK OF 4, 10MM LATE 021-117-151A Elring | 5.99 |
| OIL COOLER BYPASS: Replaces stock oil cooler allowing for use of external oil cooler. Elininates air flow blockage to #3 and #4 cylinders. Includes mounting hardware and gasket . Tapped with 3/8" NPT By-Pass w. Gasket and Hardware 9203 | 10.99 |
| Replacement Gasket for oil cooler by pass, pair 9266 | 2.99 |
| OIL COOLER BLOCK OFF; Blocks off oil passages for application where ful flow" oil system is used or when normal oil coller is no longer needed. Tapped 1/4"NPT boss for oil pressure sender. Includes mounting hardware and gasket. | |
| Oil cooler Block off w. gasket, plug and hardware 9146 | |
| The following has not been updated 10-27-09 | |
| OIL COOLER BLOCK OFF W. GASKET , PLUG & HARDWARE | 14.99 |
| Replacement Gasket for oil cooler Block off, pair | 1.99 |
| OIL FILTER ADAPTORS W. NIPPLE, PORTS LEFT mounts a standard Spin on filter in the location of your choice. Adapters have 3/8 NPT female threads. | 9.99 |
| OIL FILTER ADAPTORS W. NIPPLE, PORTS RIGHT | 10.99 |
| OIL FILTER ADAPTORS W. NIPPLE, PORTS UP | 12.99 |
| Replacement THREADED NIPPLE FOR OIL FILTER ADAPTORS | 1.50 |
| REMOTE OIL FILTER MOUNTS: Inward Facing exhaust Flange oil Filter Mount | 19.99 |
| Outward Facing exhaust Flange oil Filter Mount | 19.99 |
| Under Fender Oil Filter Mount, Type 1, thru 73 | 12.99 |
| OIL THERMOSTAT: Mounts in-line and by passes oil cooler until oil warms up to approximately175 degrees. Always partially open to avoid over pressurizing. A must in performance and cold weather applications. Oil Thermostat Only w. 3/8"NPT | 45.00 |
| Oil Thermostat w. Fittings and Clamps | 49.99 |
| OIL FILTER HIGH PRESSURE: You need this if you are running a higher pressure oil pump, or have problems with mushrooming and exploding filters. manufactured with a heavy duty steel walled canister and double bypass valves to control extreeme pressures without expanding or splitting. The 3/4"-16 threads fit most remote oil filter mounts and adapters | 12.99 |
| OIL FILTER: Spin on filter for all oil cooler kits. standard finish | 5.99 |
| OIL FILTER: Spin on filter for all oil cooler kits. Chrome Finish | 9.99 |
| OIL SYSTEM FITTINGS, CLAMPS, HOSE BARBS, SWIVELS, BUSHINGS ALL AVAILABLE TO PLUMB YOUR OIL SYSTEM. CALL FOR PRICES ON SINGLE COMPONENTS | |
| BRAIDED STAINLESS LINE: Give your VW that 200 MPH look with Braided stainless line. 3/8" 5 ft length (available in longer lengths call for prices) | 19.99 |
| BRAIDED STAINLESS LINE: Give your VW that 200 MPH look with Braided stainless line. 1/2" 5 ft length (available in longer lengths call for prices) | 24.99 |
| HI-TEMP/HI PRESSURE OIL HOSE: High Temperature Oil Hose for use with oil coolers and or remote oil filter. 3/8" , 5' length | 9.99 |
| HI-TEMP/HI PRESSURE OIL HOSE: High Temperature Oil Hose for use with oil coolers and or remote oil filter. 1/2", 5ft length | 12.99 |
| TEFLON TAPE | 1.99 |
|
"COOL THAT ENGINE" |
|
HIGH CAPACITY OIL SUMP:
Increase Oil supply and prevent oil Starvation by adding 1 1/2 quarts of
oil capacity. The cast finned design also increases cooling. Includes all
necessary hardware in 3 sizes of pickup tubes for all 1200-1600 cc engine
types. 9142
|
69.00 |
| SUPER CAPACITY OIL SUMP: This is a SLIM Line sump increases oil capacity by 3.5 quarts without the loss of ground clearance . Includes all necessary hardware. 9143 |
129.00
|
 |
|
| SLIP IN WINDAGE TRAY: Tray prevents oil from sloshing in the case that robs horsepower. ( For total control use the Stainless steel Windage Push Rod Tubes extra ) 9147 | 9.99 |
| Chrome Magnetic Drain plug Helps keep your oil free from metal bits and shaving includes sealing washer 113-115-193 8856 | 3.99 |
| MINI OIL SUMP KIT: Help prevent harmful oil starvation by installin this mini sump to increase oil capacity. Kit comes with 3 different size pick up tubes, studs, nuts, washers and gaskets. Your existing drain plud can be re used or use our 8856. 16-9520 | 27.99 |
| OIL SUCTION KIT: This kit provides for constant, and consistent oil pick up. Teh supplied sump plate depressio keeps the pick up extension submerged in oil at all time. The built in screen helps to keep harmful particles from reaching vital engine components. 16-9521 | 39.99 |
 |
|
| BILLET OIL SUMP PLATE KIT: This Billet Aluminum Oil Sump Plate will never bend or distort due to over tightening, thus causing langerous leeks like stock plates, CNC machined from high -grade aluminum billet. Includes chrome magnetic drain plug. special cap nuts and gasket kit for trouble free installation 16-8964 | 24.99 |
 |
|
| CHROME SUMP PLATE :With Drain Plug 8964 | 6.99 |
| OIL SCREEN KIT: Complete with gaskets and washers: early and late available specify | 3.99 |
| OIL CHANGE GASKET KIT: Two complete Oil change kits. Includes gaskets and sealing washers | 1.99 |
| OIL FILLER BREATHER: Gauze element breather with Chrome top fits breather tube vent or other universal applications 1/2" UNSHIELDED OR SHIELDED | 7.99 & 9.99 |
| CAST ALUMINUM OIL BREATHER KIT: Reduce crankcase pressure, eliminate blow-by and oil loss. High revving modified engines require more crankcase ventilation than the stock breather can supply. The blow-by oil is collected in the foam filter and the air vapors are vented to the atmosphere. heavy duty breather hose, a screen mesh shelf to elevate the foam filter element. | 24.99 |
| REPLACEMENT HOSE (8 FEET) BREATHER KIT: BLACK | 8.99 |
| VALVE COVER VENTS: Decrease crankcase pressure, eliminates blow by and reduce oil loss. Easy to install. Features Sure O ring system. Vent into air cleaner or a breather box. Pair | 4.99 |
| BILLET POLISHED ALUMINUM VENTED BREATHER BOX: 1 1/2" tube mount. With removable lid for easy servicing of the foam element, provisions for up to four breather lines and a split type mounting clamp that makes installation as easy as tightening two screws. Washable foam insert separates oil from vapors while keeping out dust and dirt. Vapors are released from vents under the cap. | 69.99 |
| BILLET VENTED OIL FILLER TUBE W. CAP: Replaces stock type oil filler assembly with a high tech turned aluminum filler with Billet Cap | 24.99 |
|
|
|
|
ENGINE COMPONENTS |
| PRICES SUBJECT TO CHANGE WITHOUT NOTICE | |
| UPDATED 10-21-09 | |
|
ENGINE CASES |
|
| NEW ENGINE CASE STOCK: This is the latest AS41 Version. The dual oil relief valves and large oil pick-up tube provide superior lubrication and oil control. For Stock 1500-1600 replacement, or they can be modified for high performance and racing applications 98-0431 B; 043-101-025 |
529.00 |
 |
|
| NEW STOCK AS41 MAGNESIUM ENGINE CASE: Universal Case. 043-101-025 w. 8mm chromoly case stud kit 48 pc. (will torque to 40 lbs), New case hardware kit 23 piece 113-198-033 QGAP |
599.00 |
| NEW SUPER CASE AS 41 MAGNESIUM: Welded #3 cylinder by Dave Masterson, Clearanced for Stroker Cranks by Riddle Machine, Full flow upon request only, Machine cylinder bore your request 90.5, 92, or 94mm, All cases will include a set of Chromoly studs w. nuts and washers, Large oil pick up Tube w. cam plug, New case hardware kit, and 8mm chromoly case stud kit 043-101-025 QGAP |
699.00 |
| HEAVY DUTY & BUBBLE TOP ENGINE CASES: All new construction with numerous design features added in right from the start. All cases are made from high quality aluminum alloy are are fully CNC machined. These are super stock cases which feature Buble top construction. they have raised roof design which allows up to 84mm stroker cranks and rods full clearance without having to do any hand clearancing. All the cases are filled behind the # 3 cylinder bellhousing location, drilled/Tapped for Full Flow w. plugs supplied, Universal case design for Type 1,2, or 3, Shuffle pins ont he Center mainsk, 10 mm heads studs | |
 |
|
| HD Engine case Super Stock 85.5mm 10mm case stud 98-0462 B |
689.00 |
| HD Engine case Super Stock 90.5/92mm, 10mm case stud 98-0463 B |
689.00 |
| HD Engine case Super Stock 94mm, 10mm case stud 98-0464 B |
689.00 |
 |
|
| CHROMOLY CASE STUDS: Made from high grade chromoly and precision machined to resist stretch and fatigue. Kit complete with OE style hardened washers and hex nuts. Stock length 8mm case for dual port heads or 12.7mm 8mm case stud kit for dual port heads. | |
| Stock Length 8mm Chromoly Case stud kit for Dual Port Heads 4020 |
34.99 |
 |
|
| +12.7mm 8mm Chromoly Case Stud kit for Dual port heads 4021 | 39.99 |
| Stock Length 10mm Chormoly Case Stud Kit for Dual port heads 4009 | 49.99 |
| +12.7 10mm Chromoly CAse Stud Kit, for dual port heads 4010 | 49.99 |
| Stock Length 8mm Chromoly Case sud kit for Single port heads 4005 043-198-0355P | 39.99 |
| BILLET CAM PLUG W. O RING: Case must be machined for o ring rove 16-9524 |
8.99 |
| CAM PLUG: Ensure a leak-free seal. metal for case w. groove 1300-1600 98-0156 | 1.99 |
| CAM PLUG: Ensure a leak-free seal. Rubber for O.E case w/o groove 98-0157 | 2.99 |
| MAIN BEARING DOWEL PIN SET (5) 16-9519 |
3.99 |
 |
|
| THREADED OIL GALLEY PLUG KIT: 12 pc, machining of case required 16-9515 | 11.99 |
| SELF TAPPING CASE STUDS: Upper and Lower each 4025 | 7.99 |
| CASE SAVER INSERTS: 10mm id x 1/2"o.d. Set of 8 4011 | 7.99 |
| CASE SAVER INSERTS: 10mm ID x 14mm O.D. Set of 8 4012 | 7.99 |
| ENGINE LOCK NUT KIT 9521 |
5.99 |
| DELUXE ENGINE HARDWARE KIT: From the red case half sealing nuts to the correct 15mm head nuts and extra thick hardened washers 8mm 4018 and 10mm 4019 |
24.99 |
| Shroud screw Kit, 12 pcs. 9524 | 4.99 |
| Brass 8mm-1.25 thread, 11mm head, inta./exh. nuts, set of 8 43-6051 | 5.99 |
| Engine Case Nut Kit: 103 Pieces, 10mm or 8 mm kit: AMERICAN MADE, Heat treated for maximum strength, Anodized Black Kit includes 16 Head nuts, 16 head washers, 6 Sump nuts, 6 case half washers 4mm thick, 6 case half nuts, 25 8mm Washers 3mm thick, 1-8mm Pinch bolt-60mm long, 2- 8mm pinch bolts-53mm long |
24.99 |
| ENGINE CASE ADAPTER FOR TYPE 2 & 3: Allows the installation of the Type 1 case without the 3 point mount bosses into Type 2 & 3's with 1500 or 1600 engines. Easy bolt on installation. Complete with pump cover and ll hardware. 9148 | 13.99 |
| Replacement 8mm Pump Cover only, each 9148-7 | 3.99 |
| FUEL PUMP BLOCK OFF/MOUNT | |
| Fuel Pump block off w. Boss 9094 | 3.99 |
| Billet Fuel Pump Block Off w. Hardware 31-3011 | 11.99 |
| ENGINE GASKET KITS: Complete Engine Gasket Set. Includes all the gaskets and seals for assembly. | |
| Engine gasket set, 1300-1600, Brazil | 12.99 |
| Engine gasket set, 1300-1600 top quality ELRING | 19.99 |
| Engine gasket set, 1200, 40 HP Brazil | 16.99 |
| Engine Gasket set, 1.7-1.8 Liter 021-198-009BC | 69.99 |
| Engine Gasket set, 2.0L, Type 4 Engines 029-105-245B | 89.99 |
| FLYWHEEL SEALS: | |
| Red Silicone Flywheel Seal Economy, Each | 5.00 |
| Red Silicone Flywheel Seal Elring or Equivalent | 7.99 |
| Black German flywheel seal (stock varies) | 14.99 |
| Flywheel Seal 1.7-2.0 liter Type 4 Engines Economy | 6.99 |
| Flywheel Seal 1.7-2.0 liter Type 4 Black Elring | 17.99 |
| TYPE 4 CRANK PULLEY SEALS: | |
| Stock pulley Seal, 1.7-2.0 Liter Type 4 Engines 021-105-247A | 6.99 |
| Stock Pulley Seal 1.9- 2.1 Liter Vanagon Engines 025-105-247A | 7.99 |
|
PULLEYS |
|
| UPDATED 10-28-09 | |
| ALUMINUM DEGREE CRANKSHAFT PULLEYS: Pulleys are made from High Grade Aluminum, Precision Machined and High Speed Polished to a Show Quality Shine. Featuring full 360 Degree timing marks, screened on with a special process for longevity. | |
| Standard Size Polished pulley w. Holes Black Numbers 9114 | 32.99 |
| Standard Size Polished pulley w. Holes Blue Numbers 8914 | 32.99 |
| Standard Size Polished pulley w. Holes Red Numbers 8915 | 32.99 |
| Standard Size Polished, Billet Style Pulley, Black Numbers 8779 | 32.99 |
| Standard Size Polished, Billet Style Pulley, Blue Numbers 8776 | 32.99 |
| Standard Size Polished, Billet Style Pulley, Red Numbers 8777 | 32.99 |
| EMPI HI PERFORMANCE ALUMINUM DEGREE PULLEY: Hard anodized black for maximum durablitlity plus Laser Engraved degree numbers and marks. Available in Standard size and power pulley diameter, bolt in and machined case sand seal versions. Bolt in versions come with collar and seal . Machine in versions come with the seal only. | |
| Stock Diameter Hi performance laser Pulley, Stock Installation 33-1055 | 49.00 |
| Stock Diameter Hi performance Laser Sand Seal Pulley Machine In 33-1060 | 69.00 |
| Stock Diameter Hi performance Laser Sand Seal Pulley Bolt In 33-1065 | 69.00 |
| Power Pulley Hi performance laser Pulley, Stock Installation 33-1070 | 49.00 |
| Power Pulley Hi performance Laser Sand Seal Pulley Machine In 33-1075 | 69.00 |
| Power Pulley Hi performance Laser Sand Seal Pulley Bolt In 33-1080 | 69.00 |
| Replacement Seal & Collar for Bolt In 8695 | 14.99 |
| Replacement Seal for Bolt In & Machine In 8694 | 9.99 |
| EMPI HI PERFORMANCE STEEL BILLET DEGREE PULLEY: Features approx 3 1/2 lbs in a stock size form. These pulleys have the ability to reduce crankshaft vibration, thus resulting in much longer engine case and bearing life. All pulley are fully balanced and feature a silver zinc finish with durable bright white timing marks and numbers on the black background. Bolt in versions come with collar and seal Machine in version come with seal only. | |
| Stock Diameter Billet Steel Pulley, Stock installation 33-1090 | 59.00 |
| Stock Diameter Billet Steel Pulley, Sand Seal, Machine In 33-1091 | 69.00 |
| Stock Diameter Billet Steel Pulley, Sand Seal, Bolt In 33-1092 | 69.00 |
| Replacement Seal & Collar for Bolt In 8695 | 14.99 |
| Replacement Seal for Bolt In & Machine In 8694 | 9.99 |
| 5 1/2 LBS. CRANKSHAFT PULLEY: Use this heavy pulley to add weight to the rear of your crankshaft to help relieve harmonics and increase bearing and crankshaft life. Adhesive back degree ring must be applied. Pulley is marked and instructions supplied to aid in application of degree ring. | |
| 5 1/2 lbs. Crankshaft pulley, Stock Size, Standard, Each 16-9700 | 74.99 |
| 5 1/2 lbs. Crankshaft pulley, Stock Size, Sand Seal, Each 16-9701 | 74.99 |
| SAND SEAL PULLEY KIT: same size as stock pulleys. Available in Bolt in or machined Case versions. All are 5 hole style and come with black degree numbers and marks. Seals, collars and spacers are included. Note use the extra long pulley bolt for bolt on style pulley kit. | |
| Sand Seal Pulley Kit, Bolt-in 8688 | 49.99 |
| Sand Seal Pulley Kit, Machine In 8696 | 49.99 |
| Replacement Seal & Collar for Bolt-In 8695 | 14.99 |
| Replacement Seal for Bolt In & Machine In 8694 | 7.99 |
| Extra Long Chrome Pulley Bolt & Washer 9118 | 4.99 |
| STANDARD SIZE PULLEY KITS: Kit includes our 5 Hole Design Crank Pulley with Chrome Bolt and Washer, chrome Alt/Gen Pulley, Finned Acrylic Cover in choice of color. Chrome Generator Nut and Spacer and Belt Kits come complete with matching color screened onto the crank pulley. | |
| Standard Size Red Pulley Kit w. Red cover 8650 | 59.00 |
| Standard Size Blue Pulley Kit w. Blue Cover 8651 | 59.00 |
| Standard Size Black Pulley Kit w. Smoke Cover 8652 | 59.00 |
| ADJUSTABLE TIMING POINTER: Machined Aluminum Pointer allows accurate timing within 4 degrees for precise tuning and maximum performance. Fits all type 1 engne cases with stock or power pulley 17-2918 |
29.99 |
| POWER PULLEYS: Get a real increase in horsepower with the smaller diameter pulleys. Available in Solid Billet Style or our exclusive 5 Hole design, with black degree numbers and marks. Must use power pulley belt for this application | |
| Polished Pulley w. Holes, Black Numbers 9115 | 29.99 |
| Polished Pulley Billet Style, Black Numbers 8778 | 29.99 |
| SAND SEAL POWER PULLEY KITS: | |
| Sand Seal Pulley Kit, Bolt In 8693 | 44.99 |
| Sand Seal Pulley Kit, Machine In 8699 | 44.99 |
| Replacement Seal & Collar for Bolt 8695 | 14.99 |
| Replacement Seal for Bolt In & Machine in 8694 | 7.99 |
| Pulley Spacers, for Bolt In, Pair 8688 | 7.99 |
| Extra Long Chrome Pulley Bolt & Washer 9118 | 4.99 |
| POWER PULLEY W. BELT, Black Numbers 9116 | 32.99 |
| Power Pulley Belt only 9.5 x 850mm 9120 | 6.99 |
| Chrome Stock Style Pulley 8969 | 24.99 |
| Sock Size Pulley Belt 9.5 x 905 111-903-137D | 6.99 |
| Chrome Pulley Bolt & Washer St. 9117 | 3.99 |
| Chrome Bolt & Washer Set, for Bolt In Sand Seal Pulleys (Extra Long) 9118 | 4.99 |
| Billet Crankshaft Pulley Bolt 16-6801 | 7.99 |
| Stock Style Broached Pulley Bolt 16-6802 | 7.99 |
| Billet Aluminum Alt/Gen Pulley, Outer half only 33-1040 | 27.99 |
| Billet aluminum Alt/Gen Pulley, Outer Half w. metal Inner 33-1041 | 29.99 |
| 12 v. Pulley, Gold Zinz 043-903-109 | 9.99 |
| 12v. Pulley Chrome 9191 | 9.99 |
| 12v. pulley w. Air Fins Black 040-903-109 | 29.99 |
| 6 v Pulley, Gold zinc 042-903-109 98-9011B | 14.99 |
| Alt/Gen Pulley Woodruff Key 2 pcs. | 1.99 |
| Alt/Gen shim Kit 10pc. 9197 |
19.99 |
| Billet Alternator/Generator Pulley Black Anodized 16-9706 | 39.99 |
| Billet Alternator/Generator Pulley Polished 16-9707 | 49.99 |
| Special Nut and washer set 16-9708 | 6.99 |
| Shims for the Billet pulley 5 16-9709 | 4.99 |
| Finned Pulley Cover, clear 8925 | 4.99 |
| Finned Pulley Cover, red 8926 | 4.99 |
| Finned Pulley Cover, blue 8927 | 4.99 |
| Finned Pulley Cover, yellow 8928 | 4.99 |
| Finned Pulley Cover, smoked grey 8929 | 4.99 |
| BMD SERPENTINE PULLEY SYSTEM: Includes Alternator/Generator pulley, crankshaft pulley, Tensioner, belt, bolt. Comes in Aluminum, Black, Red or Blue Ano Titan |
189.99 |
| Specialty Iron Cross, The Star, and Sand seal units available |
245.00 |
| EMPI Serpentine belt pulley kit: Economy made in China 17-2811 | |
|
BEARINGS |
|
| UPDATED 10-28-09 | |
| MAIN BEARINGS MAHLE | |
| 111-198-461 Std/ Std Main Bearings |
39.99 |
| 111-198-463 Std/.25mm 010 Main Bearings |
34.99 |
| 111-198-465 Std/.50mm 020 Main Bearings |
34.99 |
| 111-198-467 Std/.75mm 030 Main Bearings |
24.99 |
| 111-198-469 Std/1.00mm 040 Main Bearings |
24.99 |
| MAIN BRG. STD/STD 1.7, 1.8 & 2.0 TYPE 4 021-198-481A |
49.99 |
| MAIN BRG. STD/.25MM 1.7, 1.8 & 2.0 TYPE 4 021-198-483A |
49.99 |
| MAIN BRG. STD/STD VANAGON 1.9 025-198-461 |
69.99 |
| MAIN BRG. STD/.25 VANAGON 1.9 025-198-463 |
64.99 |
| MAIN BRG. SET STD/STD VANAGON 2.1 025-198-461A |
99.99 |
| LINE BORED CASE/STANDARD CRANK | |
| Main Brg. Set .50mm/Std., 1200-1600cc 111-198-471 | 49.00 |
| Main Brg. Set, 1.00mm/Std, 1200-1600 111-198-481 | 49.99 |
| LINE BORED CASE/MACHINED CRANK | |
| Main Brg. Set, .50mm/.25mm, 1200-1600cc 111-198-473 | 49.00 |
| Main Brg. Set, .50mm/.50mm, 1200-1600cc 111-198-475 | 49.00 |
| Main Brg. Set, .50mm/.75mm, 1200-1600cc 111-198-477 | 49.00 |
| Main Brg. Set, .50mm/1.00mm, 1200-1600cc 111-198-479 | 49.00 |
| Main Brg. Set, 1.00mm/.25mm, 1200-1600cc 111-198-483 | 49.00 |
| Main Brg. Set, 1.00mm/.50mm, 1200-1600cc 111-198-485 | 49.00 |
| LINE BORED CASE/STANDARD CRANK. W/1.00MM O/S THRUST | |
| Main Brg. Set, . 50mm/Std./1.00mm, 1200-1600cc 111-198-471OS | 49.00 |
| Main Brg. Set, 1.00mm/Std./1.00mm, 1200-1600cc 111-198-481OS | 49.00 |
| LINE BORED CASE/MACHINED CRANK. W/1.00MM O/S THRUST | |
| Main Brg. Set, .50mm/.25mm/1.00mm, 1200-1600cc 111-198-473OS | 49.00 |
| Main Brg. Set, .50mm/.50mm/1.00mm, 1200-1600cc 111-198-475OS | 49.00 |
| Main Brg. Set, .50mm/.75mm/1.00mm, 1200-1600cc 111-198-477OS | 49.00 |
| Main Brg. Set, 1.00mm/.25mm/1.00mm, 1200-1600cc 111-198-483OS | 49.00 |
| Main Brg. Set, 1.00mm/.50mm/1.00mm, 1200-1600cc 111-198-485OS | 49.00 |
| LINE BORED CASE/MACHINED CRANK. W/2.00MM O/S THRUST | |
| Main Brg. Set, . 50mm/Std./2.00mm, 1200-1600cc 111-198-471 02 | 49.00 |
| Main Brg. Set, 1.00mm/Std./2.00mm, 1200-1600cc 111-198-481 02 | 49.00 |
| Main Brg. Set, 1.50mm/Std./2.00mm, 1200-1600cc 111-198-491 60 | 49.00 |
| Main Brg. Set, 2.00mm/Std./2.00mm, 1200-1600cc 111-198-491 80 | 49.00 |
| LINE BORED CASE/MACHINED CRANK. W/2.00MM O/S THRUST | |
| Main Brg. Set, 1.00mm/.25mm/2.00mm, 1200-1600cc 111-198-483 02 | 49.00 |
| Main Brg. Set, 1.00mm/.50mm/2.00mm, 1200-1600cc 111-198-485 02 | 49.00 |
| Main Brg. Set, 1.50mm/.25mm./2.00mm, 1200-1600cc 111-198-493 60 | 49.00 |
| Main Brg. Set, 2.00mm/.25mm/2.00mm, 1200-1600cc 111-198-493 80 | 49.00 |
| Main Brg. Set, 1.50mm/.50mm/2.00mm, 1200-1600cc 111-198-495 60 | 49.00 |
| ROD BEARINGS & BUSHINGS | |
| KARL KOLBENSCHMIDT ROD BEARINGS | |
| 113-105-701:Std. Rod Bearing set |
19.00 |
| 113-105-707:.25mm, 010 Rod Bearing set |
19.00 |
| 113-105-713:.50mm, 020 Rod Bearing set |
19.00 |
| 113-105-719:.75mm, 030 Rod Bearing set |
19.00 |
| 113-105-725:1.00mm, 040 Rod Bearing set |
19.00 |
| MAHLE ROD BEARINGS | |
| Rod Bearings Set, Std., 1200-1600cc 113-105-701 | 15.00 |
| Rod Bearings Set, .25mm, 1200-1600cc 113-105-707 | 15.00 |
| Rod Bearings Set, .50mm, 1200-1600cc 113-105-713 | 15.00 |
| Rod Bearings Set, .75mm, 1200-1600cc 113-105-719 | 15.00 |
| Rod Bearing Set, Std., 2.0L Type 4 039-105-701 | 24.99 |
| Rod Bearing Set , .25mm, 2.0L Type 4 039-105-707 | 24.99 |
| Rod Bushing set, Set of 4 311-105-431A | 6.99 |
| CAM BEARINGS | |
| Cam bearings Std. 1300-1600cc 111-198-541 |
14.99 |
| Cam Bearings Std. Double Thrust 1300-1600cc 111-198-451HD | 21.99 |
| Cam Bearing set Std. 1.7thru 2.0 L Type 4 021-198-541 | 19.99 |
|
|
|
|
![[Product Image]](Graphics/HeadBlackBac.JPG)
aircoo
