The gears on the HD oil pump are 38 % larger then stock pumps, providing increased oil pressure, oil flow, volume and lower oil temperature. Made from cast iron and precision machined for a distortion free fit. The part # 31-2935  pump is compatible with the stock and hi performance cams with flat cam gears. Complete with gasket and studs.

For stock and moderate hi performance engines. Oil volume is increased by 25 % (40% with H.P. pump) Made from cast aluminum and machined to exacting tolerances. Pumps are supplied without cover. All pumps are for 8mm studs.

1500-1600cc, Thru 1970  

1500-1600cc, thru 1970

1600cc  from 1971

Type 1 61-67, Type 2  60-67, Type 3 62-67, Ghia 61-67

1500-1600cc

WE PREFER SHADEK

Type 1 70-71, Type 2 70-71, Type 3 70-71, Ghia 70-71

WE PREFER SHADEK.

Type 1 72-79, Type 3 72-73, ghia 72-74, Thing 73-74

WE PREFER SHADEK

Type 1 68-79, Type 2 68-71, type 3 68-73, ghia 68-74, Thing 73-74

If ur interested in a used one let us know we have some of those also $5.00

113-198-031  gasket set for this oil strainer 61-79  $1.99

021-198-031 Gasket set for this strainer  4.99

Type 1, 61-79, Type 2 60-71, Type 3 62-73, Ghia 61-74, thing 73-74

1200-1300cc  

Type 1 61-79, Type 2 60-71, Type 3 62-73, ghia 61-74, Thing 73-74

Billet Aluminum Oil Sump Plate will never bend or distort due to over tightening causing dangerous leaks like the stock plates. It also adds a custom look to the engine. CNC machind from high quality aluminum billet. Includes chrome magnetic drain plug, special cap nuts and a gasket kit for trouble free installation.

#8964  chrome sump late w. the chrome drain pllug  $9.99

High Capacity (31.9mm gears) pumps provide added oil pressure, increased oil volume and oil cooling. The filter cleans the oil 100% of the time. Kit includes filter and all necessary hardware. WILL NOT FITH WITH THE STOCK MUFFLER FOR YOUR BUG OR PART # 3417 EXHAUST FROM EMPI.

9208 Replacement oil filter 9.99

9286 Replacement 6mm Mounting  Bolts, Set of 4 $3.99

9287 Replacement 8mm Bolts, set of 4 $ 3.99

9207-5 Replacement gasket between the cover and pump, each $1.00

9207-4 Replacement gasket between the cover and pump each $1.00

9208 Rrplacement oil filter $9.99

9287 Replacement 8mm Mounting bolts, set of 4 $3.99

9207-5 Replacement gasket between the cover and pum, each $1.00

9207-4 Replacemnt gasket between pump and engine case, each $1.00

9215  1/4" Mahle NPT w. 1/2" hose Barb, Pack of 2 $4.99

9215  1/4" Male NPT w. 1/2' Hose Barb, Pack of 2 $4.99

This adapter allows you to run BOTH your stock oil cooler PLUS an external cooler and or remote Filter. This is for you Singleport guys that are concerned about overheating ur engine. If you live in NV, TX, CA its hot buy this to give your singleport a little more life. Fits Type 1 w. minimal trim to sheet metal. WILL NOT FIT WITH THE DOGHOUSE  cooler.

Same effecient and rugged stack plate design as the competition engine oil coolers. These coolers feature 1/2' female threaded ends with 3/8' hose barb fittings for easy installation. Kits include hose, 3/8' hose barb fittings, installation hardware and detailed instructions. . The transmission coolers will fit any vehicle fitted with an Automatic Transmission where space permits. From your cars ID tag find the gross weight (G.V.W.) and compare it to the G.V.W column in the chart  info. Bigger is better is te rule of thumb as you can never over cool a transmission. When in doubt go tothe next larger size. If you plan to tow a trailer or heavy load. Install the largest cooler.

2 3/4 x 11 x 1 1/2     24 plates       Heat Rejection BTU/HR  7,500  GVW Rating  10,800  

85-4002  48 Plates (other info available call me)  69.00

85-4103  72 Plates ( more info call me) 84.99

85-4105  96 Plate (more into call me) 99.00 

coolers only. Stacked plate design offers maximum cooling with almost bulletproof strength. Aircraft quality aluminum, flux less oven brazed construction. Cross path airflow effectively cools oil as air passes through as many as 16 paths across sturdy embossed plates. Insignificant pressure drop, twice the coolin in half the size. Pained black for fast heat sisipation. Fitted with 1/2" female pipe thread fittings. Mounting dampers (#9259) are recommended.

9267    96 Plate Oil cooler only 94.99

9271    48 Plate Oil Cooler only  64.99

9273    24 plate Oil Cooler only  44.99

9259    Cooler MOUNTING DAMPERS, set of 4  $ 11.99

Kit includes OIl Cooler, Bypass Adapter, Remote Filter Bracket, High Temperature Hose and all fittings required for installationl. Fits all type 1 and Type 2 thru 1971

9261    96 Plate Cooler Kit   105.00

9270    48 Plate Cooler kit   79.99

9272    24 Plate Cooler Kit   69.99

Kit includes: Cooler, bypass or Sandwich adapter with 3/4" x 16 Nipple, Remote Filter Bracket, High Temperature Hose and all fittings required for installation on yur Type 4 Rabbit or Jetta and a host of other applications. The Bypass adapter is for remote mounting of the oil filter. The Sandwich adapter fits between stock filter mount and filter.

9262    96 Plate cooler kit w. Bypass adapter  119.00

9218    96 Plate cooler kit w. Sandwich adapter  129.00

9294    48 Plate cooler kit w. Bypass adapter  99.00

9278    48 Plate coole kit w. Sandwich adapter  99.00

9295    24 Plate cooler kit w. Bypass adapter  89.99

9299    24 Plate cooler kit w. Sandwich adapter  89.99

These kits feature 1/2" copper tubing, aluminum cooling fins and mechanical expansion construction for maximum heat dissipation with the least amount of pressure drop. Available with 1/2"Male threaded ends or 1/2"hose Barb ends.

8 pass cooler kit w. 1/2' Male thread, without Booster kit. (New split fin Design.)

9233  8 Pass cooler kit 12" Hose barb without booster kit.  $69.99

6 pass cooler kit, 1/2" Hose Barb, bypass adapter, remote filter bracket, High Temperature Hose and all necessary fittings and hardware for installation on your VW. Fits all Type 1 and 2 thru 1971

Complete Kit includes everything you need for installation on your Type 4, Porsche 914, 924, Rabbit, Jetta, Dasher, Scirocco and many others. Your choice of Bypass or Sandwich adapter. Cooler is fitted with 1/2" Male fittings. The sandwich adapter fits between the stock filter mont and filter.

9285  Universal 8 pass oil cooler kit w. sandwich adapter $99.99

This 72 Plate Oil Cooler comes with 12V electric fan. Instructions and hardware for mounting fan to cooler are included. Use w. an On/Off swiitch or with an electronic or inline thermostat for worry free operation.

9293  96 Plate Competition Oil Cooler & Fan kit  $149.00

9259  Cooler Mounting Dampers, Set of 4 $14.99

9" replacement fan can also be used for custom applications. Patented skewed blade design results in high efficiency with lower noise. Can be run as a pusher or puller by simply reversing the fan blade assembly (570 max CFM at 5.4 AMPS).

Put your cooler fan on Autopitot with this Fan Thermostat (33-5721). No worries about cooking your engine because there are no more switches to remember to turn on or off. This inline Thermostat attaches to the inlet port of the oil cooler or it can be spliced into existing 1/2" hose, and it activates at 180 F.

This kit includes black powder coated 16 Pass copper tube cooler with 8AN male fittings, 10"reversible electric fan and aluminum clear anodized mounting brackets. Two brass fittings are supplied if you want barbed ends.

A complete full flow oil cooler system with fan and filter without removing the engine. All parts required to add a full flow oil system to your engine, without maching. Leaves original oil cooler in place. Includes: 96 Plate Oil Cooler (#9267), 9" Fan, hose, thermostat, pump cover, oil fitler bracket, oil return adaptor and hardware.

Can be used on a number of makes and models, including Type 4 and VW wtercooled applications. Fitted with 3/4" x 16 Nipple and tapped for 3/8NPT fittings.

Specially designed larger piston and stronger spring increase oil pressure through the system. A must when installing an oil cooler or remote filter.

Designed to add a full flow oil system without machining the crankcase. Screws into the rear oil bypass galley (spring and plunger must be removed) and provides the return route for oil from a full flow pump cover. Installs without engine removal.

Oil Cooler type 2/4, 170-2000cc/ 914, 7 plate

17-2806

Cooler for Doghouse set up, 5 plate

Replaces stock oil cooler allowing for use of external oil cooler. Eliminates air flow blackage to #3 and #4 cylinders. Includes mounting hardware and gasket. Tapped with 3/8"NPT

(Note for reference: top is out and bottom is in)

9266 Replacement gaskets for the adapter, Pair  $2.99

Blocks off oil passages for applications where full flow oil system is used or when normal oil cooler in no longer needed. Tapped 1/4"NPT boss for oil pressure sender. includes mounting hardware and gasket.

9266 Replacement gaskets, pair $2.99

Oil Thermostat mounts inline and bypasses oil cooler until oil wrms up to approx. 175 degrees. Always aprtially open to avoid over pressuring. A must in performance and cold weather applications. Kit comes complete with fittings and clamps.

33-5000 Oil Thermostat ONLY w. 3/8 "NPT

Stock Oil Filter 9.99 

8815  5 FT. 3.8" LINE $19.00

8816  10 FT. 3/8" LINE $ 39.99

8817  25 FT. 3/8" LINE $89.00

8820   5 FT. 1/2" LINE $21.99

8821  10 FT. 1/2" LINE $44.99

8822  25 FT. 1/2" LINE $94.99

9209  5FT. 3/8" HOSE $10.99

9279  25 FT. 3/8" HOSE $42.99

9280  50 FT. 3/8" HOSE $72.99

9210  5 FT. 1/2" HOSE $21.99

9282  25 FT. 1/2" HOSE $49.99

9283  50 FT. 1/2" HOSE $79.99

9284  100 FT. 1/2"  HOSE $ 154.00

increases oil supply and prevent oil starvation by adding 1 1/2 quarts of oil capacity with this oil sump. cast finned design also increases cooling. Includes necessary hardware and 3 sizes of pick up tubes for all 1200-1600cc engine types. All 3 variations of oil screens fit this sump.

Oil takes alot of abuse in an aircoold engine It has to provide both lubrication and cooling functions therefore any type of performance upgrades or demanding driving requires additonal oil capacity. Minimal loss of ground clearance. Includes hardware and 3 sizes of pick up tubes for all 1200 -1600cc engine types. must use oil screem 111-115-175B on this one.

Cast aluminm oil sump is only 1 3/4"deep. Adds oil capacity and offers improved filtration and easy bolt on installation. Fllter design allows for unimpeded oil flow even if the filter gets plugged. Stainless Steel Micron Filter can be cleaned and reused.

17-2874  Replacement filter for this unit $14.99

Tray prevents oil from foaming in the case that robs horsepower.

1/2" I.D. with offset hole location. Hole location is very close to the edge.

Reduce crankcase pressure, eliminate blow by and oil loss. High revving modified engines require more crankcase ventilation that the stock breather can supply.

8899  Billet Aluminum Oil Filler Cap w. Grooves  $14.99

7905  Billet smoooth Oil Filler Cap  $14.99

16-9512  Billet "OIL" Filler cap  $19.99

replacement cap 8904-7  $3.00

Replacement vent fitting $3.00

replacement black rubber push on cap   8900-7  $5.00

replacement vent fitting 8901-5 $3.00

Polished Billet Oil Filter Adaptor (spinner) comes with all necessary mounting hardware

Help prevent harmful oil starvation by installing this mini sump to increase oil capacity. Kit comes w. 3 different size pick up tubes, studs, nuts, washers, and gaskets. Your existing drain plug can be reused or use our magnetic drain plug # 8856

This kit provides for constant, and consistant oil pick up. The supplied sump plate depression keeps the pick up extension submerged in oil at all times. The built in screen helps to keep particles from reaching vital engine components. This is a great addition to any performance  engine or a little extra help to insure a long engine life.

Use the clean, billet oil fill tower when the alternator has been relocated or not in use. Replaces the alternator stand using existing studs and nuts. Black Anodized Aluminum Cap is included.

This cast aluminum mini sump replaces your stock oil screen and cover and offers improved filtration helps prevent oil starvation during hard cornering and easy bolt on installation. Filter design allows for unimpeded oil flow-even if the filter gets plugged. Filter can be cleaned and reused.

filter # 17-2874  14.99 each

This converts Type 3 cases and universal cases which have not been machined for dipstick

Use on late style cases and type 3 cases to block off oil fill opening to convert to upright applications w. gasket

Black or Polished available.  Keep oil lines in chek while maintaineg that Clean look. Bolts at exhaust flange and helpsprotect oil lines from engine and exhaust. Fits up to 3/4" O.D. Hose

Polised $29.00 each 17-2810